利用应力场预测热液区域——以TAG区为例   总被引：1，自引：0，他引：1  

陈钦柱  陶春辉  廖时理  李怀明  邓显明 《海洋学报》2017,39(1):46-51

本文根据TAG区的钻探资料及岩心测试结果,建立了双层地质模型,在此基础上利用ANSYS应力软件并结合TAG热液区的地形数据对该区进行应力模拟。结果表明:热液喷口区域与最大水平应力低值区有较好的对应关系。其中仍处于活动状态的TAG丘状体区呈现明显的局部最大水平应力低值;而已经停止活动并且不具有典型喷口地形的MIR丘状体区域则处于最大水平应力的非封闭低值区域。据此,本文在TAG丘状体区域圈定了5个喷口可能区域,钻探结果揭示区内存在较好的矿化和蚀变现象,表明应力场预测法可能是一种有效的成矿预测方法。  相似文献   

Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S,southern Mid-Atlantic Ridge   总被引：1，自引：0，他引：1  

王淑杰  李怀明  翟世奎  于增慧  邵宗泽  蔡宗伟 《海洋学报(英文版)》2017,36(2):22-34

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge(SMAR) was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research Development Association(COMRA). Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types:(1) the Ferich sulfide, which contains mainly pyrite and chalcopyrite;(2) the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and(3) the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite(isocubanite and possible coarse pyrite), fine pyrite,sphalerite(marmatite), galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations(Py-I and Py-II) of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals(Py-I). Sphalerite in the Fe-Zn-rich sulfide is characterized by a"chalcopyrite disease" phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.  相似文献   

基于PXRF的西南印度洋脊硫化物表层沉积物地球化学找矿研究   总被引：3，自引：0，他引：3  

廖时理  陶春辉  李怀明  张国堙  梁锦  杨伟芳 《海洋学报(英文版)》2017,36(7):66-76

海底热液喷发形成的热液羽状流中富含成矿物质,并沉淀在距离热液喷口不等的范围内。对西南印度洋中脊热液喷口附近、距离喷口中等距离、远离喷口的六个表层沉积物样品开展了不同粒度沉积物的便携式XRF（PXRF）分析。结果表明,PXRF可以有效获得的洋中脊钙质沉积物中成矿元素的富集特征。>40目的沉积物样品具有较高的Cu、Zn、Fe、Mn等元素含量,40目以下沉积物中则相对稳定,可能与粗粒沉积物中玄武岩碎屑/玻璃含量较高有关,与镜下鉴定结果一致。以热液喷口为中心,表层沉积物中表现出Cu、Zn、As、Fe、Mn的元素分带,靠近喷口的沉积物中具有较高的成矿元素的含量,并具有较高的Cu/Fe、Zn/Fe比值或者Cu/Mn与Zn/Mn比值。上述结论表明,洋中脊沉积物中成矿元素的含量主要受与喷口的距离的影响,而与粒度的关系不大,洋中脊沉积物地球化学找矿应采用40目以下粒径沉积物作为分析样品。通过PXRF获得的Cu、Zn、As、Fe、Mn等元素含量及其比值特征可以作为海底多金属硫化物沉积物地球化学找矿的指标,该方法满足快速有效识别洋中脊沉积物中地球化学异常的要求。  相似文献   

闽北大药坑金矿床黄铁矿成分标型及硫、铅同位素组成研究   总被引：1，自引：0，他引：1  

肖凡  班宜忠 《矿床地质》2017,36(1):171-184

闽北政和-建瓯矿集区内大药坑金矿床是一个赋存于韧性剪切带中的小型矿床。在野外地质调查基础上,通过分析载金矿物黄铁矿电子探针成分和硫化物硫、铅同位素组成,探讨了大药坑金矿床的成矿作用问题。研究表明,大药坑金矿床黄铁矿的Co/Ni比值大多在1~5之间,为岩浆热液成因黄铁矿,成矿热液的温度和盐度均较高,也表现出岩浆热液的性质;金属硫化物的δ~(34) SCDT均为靠近0的较低正值(0.1‰~3.4‰),说明成矿物质为岩浆来源,硫化物的铅同位素比值以及高μ(~(238)U/~(204)Pb)和ω(~(232)Th/~(204)Pb)等特征,说明成矿物质具有壳幔混源特征。结合区域研究资料,认为大药坑金矿床形成于东南沿海区域强烈壳幔作用时期,与燕山期火山-侵入杂岩有关,矿床成因类型为岩浆期后热液型。  相似文献   

广西西大明山弄屯铅锌矿床断裂构造解析   总被引：1，自引：0，他引：1  

李赛赛  冯佐海  单永磐  付伟  乐兴文  刘武文  徐文忠 《矿床地质》2017,36(2):275-290

弄屯矿床是西大明山地区新发现的规模最大的铅锌矿床,是受断裂控制的典型热液脉型矿床。文章在充分搜集已有勘查资料的基础上,认为铅锌矿体主要受NE向和(近)EW向断裂控制,矿体主要产在断裂浅部产状较缓的部位,向深部断裂产状变陡,矿体厚度减薄直至尖灭;而且主矿体沿NE向断裂具有向SW侧伏的趋势。在此基础上,利用控矿断裂的擦痕、阶步以及伴生的节理、牵引褶皱等小构造,对控矿断裂的运动学和动力学特征进行了解析,分析认为控矿断裂在成矿期表现为逆断层活动特征,是受近SN向主压应力作用下形成的。利用SPSS、Surfer软件对矿体的产状、有用组分含量等数据进行统计分析并绘制了等值线图,研究得出成矿热液是先由F1断裂进入NE向断裂中,随后沿NE向断裂由西南向北东运移,并最终导致Zn、Pb先后沉淀富集形成厚大的矿体。根据已有的同位素数据和构造解析资料,可基本确定弄屯铅锌矿床形成于燕山晚期。  相似文献   

Geology and geochemistry of fault-hosted hydrothermal and sedimentary manganese deposits in the Oakover Basin,east Pilbara,Western Australia     

S. A. Jones 《Australian Journal of Earth Sciences》2017,64(1):63-102

Manganese mineralisation in the Oakover Basin is associated with Mesoproterozoic extension, basin formation and deposition of the Manganese Group. The underlying basement architecture of the Oakover Basin (a local half-graben geometry), inherited from the Neoarchean rifting event, plays an important role on the distribution, style and timing of manganese deposits. Fault-hosted manganese deposits are dominant along the ‘active’ faulted eastern margin, whereas flat-lying sedimentary deposits are dominant along the western ‘passive’ margin reflecting differences in ore-forming processes. The large number of significant manganese deposits in the Oakover Basin, previously thought to reflect a spatial association with Carawine Dolomite, more likely reflects the restricted nature of the Mesoproterozoic basin and development of a large reservoir of Mn²⁺ and Fe²⁺ in an anoxic zone of a stratified basin. Low O₂ conditions in the basin were caused by a paleotopographic high forming a barrier to open ocean circulation. The western margin sedimentary deposits formed later than the fault-hosted hydrothermal deposits along the eastern margin, once a significant reservoir of Mn²⁺ and Fe²⁺ had developed, and when there was sufficient subsidence to allow migration of the redox front onto the shallow shelf, with Mn precipitation on and within the seafloor sediments. The sedimentary manganese deposits are not uniformly distributed along the western edge of the basin; instead they are concentrated into discrete areas (e.g. Mt Cooke–Utah–Mt Rove, Bee Hill, Skull Springs and the Ripon Hills districts), suggesting a degree of structural control on their distribution. Fault-hosted manganese is observed beneath and adjacent to many of the sedimentary deposits. Marked geochemical differences are observed between the Woodie Woodie hydrothermal deposits and the sedimentary deposits. Woodie Woodie deposits display higher Ba, U, Mo, As, Sn, Bi, Pb, S and Cu than the sedimentary deposits, reflecting the composition of the hydrothermal fluids. The Al₂O₃ values of the Ripon Hills and Mt Cooke deposits are much higher than the Woodie Woodie deposits, reflecting the composition of the dominant host rock, as Al₂O₃ is typically <5 wt% in the Carawine Dolomite, but is >10 wt% in basal shale units of the Manganese Group. Highly variable Mn:Fe ratios (?5:1) in the hydrothermal manganese at Woodie Woodie reflects rapid deposition of Mn in and around fault zones. In contrast, slower accumulation of Mn oxides on and within the seafloor to form the large sedimentary deposits results in Mn:Fe ratios closer to 1:1 and elevated Co + Ni and REE values.  相似文献   

In situ Pb and bulk Sr isotope analysis of the Yinchanggou Pb-Zn deposit in Sichuan Province (SW China): Constraints on the origin and evolution of hydrothermal fluids     

《Ore Geology Reviews》2017

The Yinchanggou Pb-Zn deposit, located in southwestern Sichuan Province, western Yangtze Block, is stratigraphically controlled by late Ediacaran Dengying Formation and contains >0.3 Mt of metal reserves with 11 wt% Pb + Zn. A principal feature is that this deposit is structurally controlled by normal faults, whereas other typical deposits nearby (e.g. Maozu) are controlled by reverse faults. The origin of the Yinchanggou deposit is still controversial. Ore genetic models, based on conventional whole-rock isotope tracers, favor either sedimentary basin brine, magmatic water or metamorphic fluid sources. Here we use in situ Pb and bulk Sr isotope features of sulfide minerals to constrain the origin and evolution of hydrothermal fluids. The Pb isotope compositions of galena determined by femtosecond LA-MC-ICPMS are as follows: ²⁰⁶Pb/²⁰⁴Pb = 18.17–18.24, ²⁰⁷Pb/²⁰⁴Pb = 15.69–15.71, ²⁰⁸Pb/²⁰⁴Pb = 38.51–38.63. These in situ Pb isotope data overlap with bulk-chemistry Pb isotope compositions of sulfide minerals (²⁰⁶Pb/²⁰⁴Pb = 18.11–18.40, ²⁰⁷Pb/²⁰⁴Pb = 15.66–15.76, ²⁰⁸Pb/²⁰⁴Pb = 38.25–38.88), and both sets of data plotting above the Pb evolution curve of average upper continental crust. Such Pb isotope signatures suggest an upper crustal source of Pb. In addition, the coarse-grained galena in massive ore collected from the deep part has higher ²⁰⁶Pb/²⁰⁴Pb ratios (18.18–18.24) than the fine-grained galena in stockwork ore sampled from the shallow part (²⁰⁶Pb/²⁰⁴Pb = 18.17–18.19), whereas the latter has higher ²⁰⁸Pb/²⁰⁴Pb ratios (38.59–38.63) than the former (²⁰⁸Pb/²⁰⁴Pb = 38.51–38.59). However, both types of galena have the same ²⁰⁷Pb/²⁰⁴Pb ratios (15.69–15.71). This implies two independent Pb sources, and the metal Pb derived from the basement metamorphic rocks was dominant during the early phase of ore formation in the deep part, whereas the ore-hosting sedimentary rocks supplied the majority of metal Pb at the late phase in the shallow part. In addition, sphalerite separated from different levels has initial ⁸⁷Sr/⁸⁶Sr ratios ranging from 0.7101 to 0.7130, which are higher than the ore formation age-corrected ⁸⁷Sr/⁸⁶Sr ratios of country sedimentary rocks (⁸⁷Sr/⁸⁶Sr_200 Ma = 0.7083–0.7096), but are significantly lower than those of the ore formation age-corrected basement rocks (⁸⁷Sr/⁸⁶Sr_200 Ma = 0.7243–0.7288). Again, such Sr isotope signatures suggest that the above two Pb sources were involved in ore formation. Hence, the gradually mixing process of mineralizing elements and associated fluids plays a key role in the precipitation of sulfide minerals at the Yinchanggou ore district. Integrating all the evidence, we interpret the Yinchanggou deposit as a strata-bound, normal fault-controlled epigenetic deposit that formed during the late Indosinian. We also propose that the massive ore is formed earlier than the stockwork ore, and the temporal-spatial variations of Pb and Sr isotopes suggest a certain potential of ore prospecting in the deep mining area.  相似文献   

胶西北金矿集中区亚热柱幔枝构造成矿研究          下载免费PDF全文

牛树银  孙爱群  张建珍  马宝军  王宝德  王铮  张福祥  陈超  武际春  赵荣欣  王善飞 《山东国土资源》2012,28(12)

胶西北是我国最大的黄金矿集区,不仅黄金储量巨大,而且成矿时间集中（115±5)Ma。研究认为燕山运动以来,华北东部地区进入了地幔热柱演化阶段;胶西北形成了莱阳地幔亚热柱及其外围郭家店、艾山、盘石店等幔枝构造体系。深源含矿流体通过地幔热柱→地幔亚热柱→幔枝构造→有利构造扩容带,迁移到幔枝构造的脆韧性韧脆性剪切带、侵入岩体的内、外接触带、密集的构造裂隙带、各种脉岩与围岩的接触带等有利部位集聚成矿,从而构成以幔枝构造为中心的金成矿密集区。该文以郭家店幔枝构造研究为例,分析了成矿作用,归纳了成矿模式。  相似文献   

热液成因有色金属矿多维异常体系:以马头斑岩型钼铜矿为例     

马生明  朱立新 《吉林大学学报(地球科学版)》2014,44(1):134

从深部矿地球化学勘查实际需求出发,根据近年来20余个矿床研究结果,总结提出了热液成因有色金属矿床矿致异常规律--多维异常体系。多维异常体系是指产出在特定成矿地质时期地质体中,空间有序共存、形成机理各异、成矿指向递进的多属性地球化学异常体系,将在斑岩型、矽卡岩型、热液型以及沉积改造型等与热液作用有关的有色金属矿产深部矿预测和评价中发挥重要作用。以安徽马头斑岩型钼铜矿为例,对该矿床多维异常体系进行了探讨。结果表明: 在该矿床中,存在着以Na₂O为代表的负异常体系、以S为代表的矿化剂元素异常体系、矿化剂元素S与Fe和成矿元素间协同平衡体系、成矿及其伴生元素异常体系等,这些异常体系对成矿的指示作用是递进的,从而证实了多维异常体系的存在。对应用多维异常体系思路预测和评价深部矿进行了说明。  相似文献   

西藏江达县颠达铅锌矿床地质特征及成因探讨     

张遵遵  李泽琴  胡涛  陈实识  王奖臻  宋世伟 《地质与资源》2013,22(1):50-54

颠达铅锌矿床区域上北西、北西西向断裂、褶皱十分发育.铅锌矿体呈似层状、脉状沿断层接触带产于F₁断层上盘波里拉组（T₃b）中厚层状泥晶灰岩中.矿石类型简单,矿体的产出受地层、构造控制较为明显.根据矿床地质特征,结合区域地质构造演化,认为本矿床是该区较为典型的碳酸盐岩层控热液脉型铅锌矿床,并建立了成矿模式.  相似文献